(2 customer reviews)

Internally Threaded Insertion Pin -Titanium

21,00 

  • High Polish Implant Grade Titanium
  • Manufacturer’s warranty against manufacturing defects

 

Added to wishlist
Added to wishlist

Check your favourites from the wishlist

Delivery time for backordered items is 1-3 weeks.

Inner thread piercing jewelry installation

If inserting jewelry in the internal thread piercing at home feels challenging here is the solution for you! These installation pins will help you to install the piercing jewelry and make it easy! Attach the desired piercing jewelry to the end of the installation pin, then put the installation pin through the piercing hole and the jewelry slides nicely! Remove the installation pin from the jewelry and turn on the jewelry top!

With the installation pin, you will also make it easier to get a jewelry on a piercing hole, which has not had a jewelry for a long time. In this case, the piercing hole has often been slightly closed, but it is quite possible to find and save it with these mounting pins. The thin end will ensure that you will find your piercing hole again and get back the sizeĀ  you want (recommended to put 1mm-1,2mm at maximum to avoid the tissue damage ).

How to choose the right size?

Choose the size of the jewelry you ordered by your installation pin to choose the same thickness. If your jewelry is 1.2mm in size also select 1.2mm as the installation pin. Also, select the installation pin with a threaded or threadless end, depending on the closing mechanism of your jewelry. You can also carefully bend the installation pin to get it better for angle for your piercing, such as Forward Helix and Tragus piercing.

The installation pin can also be used as a stretching taper!

The installation pin is also really well suited for stretching. The installation pin is designed so that one end is very thin, to find your piercing hole easily and the other end of the installation method is the size of the desired thickness. For example, if your septum jewelry is currently 1.2mm thick, you can order a 1.6mm thick installation pin and a 1.6mm thick jewelry that you can easily get in place. This allows you to safely get the desired size.

Additional information

Thickness

, ,

Brand

2 reviews for Internally Threaded Insertion Pin -Titanium

1-2 of 2 reviews
  1. Clever and convenient help for changing jewelry.

  2. This is a handy tool for installing the tongue jewelry. The sharp edge of the internally threaded jewelry sometimes tears the piercing a little, but not with this one.

Add a review
Currently, we are not accepting new reviews

Delivery & Shipping

Free delivery on orders over 250,00 ā‚¬

Delivery time for backordered items is 1-3 weeks.

Worldwide delivery UPS and PostNord.

Terms and conditions

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

Choose the material you want

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry

As a new subscriber

-15%

From the first order

*Cannot be combined with other discounts. The discount does not apply to BVLA products.

LuxJewelle

Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa: Luxjewelle.fi

Welcome to Luxjewelle

Continue shopping in english: Luxjewelle.com